Deutsch
EnglishCategories
Quick purchase
Please enter the article no. from our catalogue.
Welcome back!
Customer group: Guest
Lathe chuck
The right choice of chuck is crucial for the quality of the manufactured parts. Lathe chucks are special tool holders that are attached to a lathe and are used to lock workpieces that are set in rotation. They come in different designs and sizes for different applications. Most lathe chucks are made of steel and are very hard and strong. There are different materials from which the jaws are made for different requirements. There are jaws made of steel, aluminum or plastic, for example, so as not to cause additional damage to the workpiece. Lathe chucks are therefore subjected to different stresses depending on the application. For general use in metalworking, a simple, robust lathe chuck is completely sufficient. For machining processes with higher demands and larger diameters, however, a solid lathe chuck is required.Types of clamping:
- 3-jaw lathe chuck, centrically clamping
- 3-jaw lathe chuck, acentrically clamping, individually
- 4-jaw lathe chuck, centrically clamping
- 4-jaw lathe chuck, acentrically clamping, individually
Outer jaws and inner jaws are supplied with a lathe chuck.
Due to their design, the jaws are suitable for different areas of application. The inner jaws are intended for internal clamping of the workpiece and for external clamping of small workpieces. The outer jaws, on the other hand, are intended for purely external clamping of large workpieces - but only cover a certain range (from-to) of diameters. They are mainly used when working on larger or heavier workpieces.
The main feature of lathe chucks is their universal applicability. They can be used on almost any type of lathe, whether it is a CNC lathe or a conventional lathe.
Compare now!
Three-jaw chucks CI3P ø 125mm, cast
Diameter: 125 mm
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 32 mm
Height with jaws: 76 mm
Height without jaws: 56 mm
Depth of recording: 4 mm
Speed: 3,200 min-1
Mounting thread:
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 32 mm
Height with jaws: 76 mm
Height without jaws: 56 mm
Depth of recording: 4 mm
Speed: 3,200 min-1
Mounting thread:
Shipping time: 3-5 working days
Three-jaw chucks CS3C ø 250 mm Camlock DIN ISO 702-2 Nr . 6
Chucks steel
Camlock DIN 55029 Direct recording
Diameter: 250 mm
Through Hole : 78 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Camlock DIN 55029 Direct recording
Diameter: 250 mm
Through Hole : 78 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Shipping time: 3-5 working days
Three-jaw lathe chuck ø 160 mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 160 mm
Through hole: 40mm
Height with jaws: 101 mm
Height without jaws: 71 mm
Speed: 3600 min-1
Through hole: 40mm
Height with jaws: 101 mm
Height without jaws: 71 mm
Speed: 3600 min-1
Shipping time: 3-5 working days
Three-jaw lathe chuck ø 200 mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 200 mm
Through Hole: 50 mm
Height with jaws: 124 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Through Hole: 50 mm
Height with jaws: 124 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Shipping time: 3-5 working days
Three-jaw lathe chuck ø 250 mm Camlock DIN ISO 702-2 Nr. 6
For OptiTurn TH 4210 / 4210D TH / TH 4210V / TH 4215D Diameter: 250 mm
Through Hole: 70 mm
Height with jaws: 140 mm
Height without jaws: 98 mm
Speed: 2400 min-1
Through Hole: 70 mm
Height with jaws: 140 mm
Height without jaws: 98 mm
Speed: 2400 min-1
Shipping time: 3-5 working days
Top jaw set , soft, unstepped for CS3C ø 250 mm Nr . 6 and Nr . 8
Camlock DIN ISO 702-2 Nos. 6 and CS3C ø 250 mm Camlock DIN ISO 702-2 Nr . 8
Shipping time: 3-5 working days
