Deutsch
EnglishCategories
Quick purchase
Please enter the article no. from our catalogue.
Welcome back!
Customer group: Guest
Lathe chuck
The right choice of chuck is crucial for the quality of the manufactured parts. Lathe chucks are special tool holders that are attached to a lathe and are used to lock workpieces that are set in rotation. They come in different designs and sizes for different applications. Most lathe chucks are made of steel and are very hard and strong. There are different materials from which the jaws are made for different requirements. There are jaws made of steel, aluminum or plastic, for example, so as not to cause additional damage to the workpiece. Lathe chucks are therefore subjected to different stresses depending on the application. For general use in metalworking, a simple, robust lathe chuck is completely sufficient. For machining processes with higher demands and larger diameters, however, a solid lathe chuck is required.Types of clamping:
- 3-jaw lathe chuck, centrically clamping
- 3-jaw lathe chuck, acentrically clamping, individually
- 4-jaw lathe chuck, centrically clamping
- 4-jaw lathe chuck, acentrically clamping, individually
Outer jaws and inner jaws are supplied with a lathe chuck.
Due to their design, the jaws are suitable for different areas of application. The inner jaws are intended for internal clamping of the workpiece and for external clamping of small workpieces. The outer jaws, on the other hand, are intended for purely external clamping of large workpieces - but only cover a certain range (from-to) of diameters. They are mainly used when working on larger or heavier workpieces.
The main feature of lathe chucks is their universal applicability. They can be used on almost any type of lathe, whether it is a CNC lathe or a conventional lathe.
Compare now!
Four-jaw chucks CS4C ø 250 mm Camlock DIN ISO 702-2 Nr . 6
Diameter: 250 mm
Through Hole : 76 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Through Hole : 76 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Shipping time: available immediately
Four-jaw lathe chuck Ø 125 mm, concentric clamping
Diameter: 125 mm
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 30 mm
Height with jaws: 84 mm
Height without jaws: 58 mm
Depth of recording: 4 mm
Speed: 2750 min-1
Mounting thread: M8
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 30 mm
Height with jaws: 84 mm
Height without jaws: 58 mm
Depth of recording: 4 mm
Speed: 2750 min-1
Mounting thread: M8
Shipping time: available immediately
Four-jaw lathe chuck Ø 160mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 160 mm
Through Hole: 40 mm
Height with jaws: 95 mm
Height without jaws: 70 mm
Speed: 2150 min-1
Through Hole: 40 mm
Height with jaws: 95 mm
Height without jaws: 70 mm
Speed: 2150 min-1
Shipping time: available immediately
Four-jaw lathe chuck Ø 200mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 200 mm
Through hole: 55mm
Height with jaws: 109 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Through hole: 55mm
Height with jaws: 109 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Shipping time: available immediately
Four-jaw lathe chuck Ø 200mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 200 mm
Through hole: 55mm
Height with jaws: 120 mm
Height without jaws: 91 mm
Speed: 2100 mm
Through hole: 55mm
Height with jaws: 120 mm
Height without jaws: 91 mm
Speed: 2100 mm
Shipping time: available immediately
Four-jaw lathe chuck Ø 200mm Camlock DIN ISO 702-2 Nr. 5 centric
Diameter: 200 mm
Through hole: 55mm
Height with jaws: 109 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Through hole: 55mm
Height with jaws: 109 mm
Height without jaws: 86 mm
Speed: 3000 min-1
Shipping time: available immediately
Four-jaw lathe chuck Ø 200mm Camlock DIN ISO 702-2 Nr. 5 individually
Diameter: 200 mm
Through hole: 55mm
Height with jaws: 120 mm
Height without jaws: 91 mm
Speed: 2100 mm
Through hole: 55mm
Height with jaws: 120 mm
Height without jaws: 91 mm
Speed: 2100 mm
Shipping time: available immediately
Four-jaw lathe chuck Ø 250 mm Camlock DIN ISO 702-2 Nr. 6
For OptiTurn TH 4210 / 4210D TH / TH 4210V / TH 4215D Diameter: 250 mm
Through Hole: 70 mm
Height with jaws: 120 mm
Height without jaws: 95 mm
Speed: 2400 min-1
Through Hole: 70 mm
Height with jaws: 120 mm
Height without jaws: 95 mm
Speed: 2400 min-1
Shipping time: available immediately
Four-jaw lathe chuck Ø 250 mm Camlock DIN ISO 702-2 Nr. 6
4-jaw chuck Camlock - individually exciting - lathe chuck cast
- Camlock Direct Recording
- Concentricity less than 0.05mm
- Incl. chuck key
- Camlock Direct Recording
- Concentricity less than 0.05mm
- Incl. chuck key
Shipping time: available immediately
Four-jaw lathe chuck Ø 80 mm
Individually exciting Diameter: 80 mm
Mounting Ø 55 mm
Hole circle: 66 mm
Through Hole: 22 mm
Height with jaws: 56 mm
Height without jaws: 42 mm
Depth of recording: 3.5 mm
Speed: 4800 min-1
Mounting thread: M6
Mounting Ø 55 mm
Hole circle: 66 mm
Through Hole: 22 mm
Height with jaws: 56 mm
Height without jaws: 42 mm
Depth of recording: 3.5 mm
Speed: 4800 min-1
Mounting thread: M6
Shipping time: available immediately
Hard top jaws for 3- and 4-jaw lathe chuck Ø 200 mm hydraulically
Accessories for OptiTurn L 44
Shipping time: available immediately
Three-jaw chucks CI3P ø 125mm, cast
Diameter: 125 mm
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 32 mm
Height with jaws: 76 mm
Height without jaws: 56 mm
Depth of recording: 4 mm
Speed: 3,200 min-1
Mounting thread:
Mounting Ø: 95 mm
Hole circle: 108 mm
Through Hole: 32 mm
Height with jaws: 76 mm
Height without jaws: 56 mm
Depth of recording: 4 mm
Speed: 3,200 min-1
Mounting thread:
Shipping time: available immediately
Three-jaw chucks CS3C ø 250 mm Camlock DIN ISO 702-2 Nr . 6
Chucks steel
Camlock DIN 55029 Direct recording
Diameter: 250 mm
Through Hole : 78 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Camlock DIN 55029 Direct recording
Diameter: 250 mm
Through Hole : 78 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed : 3,500 min - 1
Shipping time: available immediately
Three-jaw lathe chuck ø 160 mm Camlock DIN ISO 702-2 Nr. 4
Diameter: 160 mm
Through hole: 40mm
Height with jaws: 101 mm
Height without jaws: 71 mm
Speed: 3600 min-1
Through hole: 40mm
Height with jaws: 101 mm
Height without jaws: 71 mm
Speed: 3600 min-1
Shipping time: available immediately
