OptiTurn TH 4210D - Centre lathes

OptiTurn TH 4210D -. Precision Centre lathes, Mature technology, complete equipment, easy to use TH 4210D / 4215D TH with digital position display DPA 21, TH 4210V with Siemens inverters Vario drive
- Hardened and ground slideways
- Spindle Camlock DIN ISO 702-2 Nr. 6
- Coolant system
- Separate coolant tank with level indicator and oil separator Easy and complete emptying and cleaning in accordance with DIN
- Guaranteed concentricity precision of the spindle nose better than 0.015 mm
stored in oil bath main spindle, hardened and ground with 2 adjustable precision taper roller bearings -
- All metric thread pitches in the range of 0.2 to 14 mm / rev and all inch threads in the range 72-2 threads per inch without replacement of change gears by gearshift lever on the control panel adjustable
- Forward / reverse switchable on bedslide via indexing spindle
- Central lubrication at the lathe slide
poured Substructure and engine Meehanite cast in one piece -
- leading spindle
- Emergency stop device with foot control
- Safety handwheels with release function is given in the X- and Z-axis
TH 4210D / 4215D TH / TH 4210V:
DRO DPA21 - User-friendly keypad, splashproof, closed and glare
- Higher working accuracy
- Error rate is reduced
- X, Y / Z 0, Z axis with 8-digit display
- Supplied sensor for detecting the spindle speeds
- Glass scales
TH 4210V: - Quick change tool holders 5-B
- Tool holder 20 x 100 type D for square tool
- SINAMICS G120D
Equipment Details: cabinet - 24 Volt DC power supply SINAMICS G120D
- All contactors and relays from Siemens or Schneider - TH 4210V Eaton
Main spindle - In oil bath
- Gears smoothly, hardened and ground
Carriage - worked Precise
- Handwheels with adjustable precision scaling of 0.04 / 0.02 mm
- All guides adjustable by gibs
- Adjustment range ± 90 top slide
Coolant system LED machine lamp Prism bed - Heavily ribbed
- Cast iron
- Induction hardened and precision ground
Tailstock - for taper turning ± 10 mm adjustable
- Tailstock spindle sleeve and handwheel with adjustable precision scaling 0.025mm

Length (product): 2025 mm
Width / depth (product): 915 mm
Height (product): 1615 mm
Weight (net): 1160 kg
Drive motor power: 4.5 kW
Power consumption: 4.6 kW
Total power consumption:
Voltage: 400 V
Phase (s): 3 Ph
Current: ~
Frequency: 50 Hz
Spindle taper: Camlock DIN ISO 702-2 Nr. 6
Spindle bore / bar passage diameter: 52 mm
Center height: 210 mm
Distance between centers: 1000 mm
Swing over machine bed: 420 mm
Swing in the bed gap: 590 mm
Swing over cross slide: 250 mm
Turning length in the bed gap: 260 mm
Bed width: 250 mm
Speed ​​range: 45 - 1800 rpm 1
Number of speed ranges: 16 steps
X axis travel: 140 mm
Y axis: 230 mm
Tailstock: MK 4
Tailstock quill stroke: 120 mm
Tailstock quill diameter: 50 mm
Coolant system performance coolant pump: 100 W
Spindle taper: MK 6
Tool holder Seat height max .: 20 x 20 mm
Tool holder seat height with optional quick change tool:
Feed range longitudinal: 0,05 - 1,7 mm / rev
Number of feeds along: 17
Feed range plan: 0.025 to 0.85 mm / rev
Number of feed plan: 17
Pitch Metric: 0,2 - 14 mm / U
Number of pitches Metric: 39
Slope inches: 72-2 Gg / inch
Number of slopes inch: 45
Slope Diametral Pitch: 8-44
Number of slopes Diametral Pitch: 21
Slope module thread 0.3 - 3.5mm
Number of slopes module thread: 18

Steady rest passage Ø 15-105 mm
- Follow rest passage Ø 10- 65 mm
- Plane clamping Ø 350 mm
- LED machine light
- Reducing MK4 / MK6
- Steady center MT4
- Change gear set
- Operating tools
- Quadruple tool holder
Already included in delivery :
Maschinenerstbefüllung with quality oil Chucks not forget !