OPTIturn TX 6222

 

OPTIturn TX 6222 from Optimum

 

From category lathe

- Precision lathe and turning lathe meets the highest requirements in technical equipment and precision. With digital position display NEWALL DP 700.
 - Machine bed made of strongly ribbed castings
- Machine base made of steel
 - High stiffness of the headstock housing due to strongly ribbed
25 GG cast
 - All gears of the feed gear of steel, hardened and hardened
ground, shafts on needle bearings, all components are machined in
Oil bath lubricated
 - Hardened and polished planar spindle ensures enormous
Accuracy and durability
 - Due to the high cutting performance, a high chip reduction is possible
Roughing is not a problem
 - Bed guides hardened and precision ground
 - Electronic brake of main spindle
- Electronic feed cut-off of the Z axis
 - Large spindle bore Ø 80 mm (TX5216) and Ø 105 mm (TX6222)
 - All controls (electric) to reach central
 - Complete illumination of the work area
 - External coolant tank with level indicator and oil separator
- Quick-change steel holder SWH 5-B (TX 5216)
- Quick-change steel holder SWH 7-C (TX 6222)
- 1 steel holder 25 x 120 Type D for four-pointed chisels
  Digital position display DP700 - Two measuring strips Microsyn and one measuring strip Spherosyn,
insensitive to contamination
 - User interface of the display is intuitive and user-friendly
 - Developed and manufactured in England
 - IP67 protection
 - 5 years warranty on display unit and reading heads
  Equipment details: Threads and feeders - Large range of threads and feeds, without having to change the gear wheels in the shearing machine
 Removable back panel - service-friendly
 Electric position switch - with quadruple position stop
 Lockbox housing completely sealed
 - With safety device against simultaneous operation of the thread cutting and feeding mechanism
 Spandrel protection - Lockable
- Proceed with the bed sleds
- Integrated position indicator and coolant hose
 - can be moved manually
 Centralized operation user-friendly in touchpanel - feed switch off at the push of a button
- Drive train spindle
 - integrated Eilgan g X- and Z-axis
- Machine light
 - Coolant
 Energy chain - gentle piping management
 Complete guide and traction spindle cover Rapid traverse - integrated into machine bed
 No bicycles required

Technical specifications / OPTIturn TX 6222 / lathe:

Length: 3600 mm
Width / Depth: 1195 mm
Height: 1860 mm
Weight: 2800 kg
Power drive motor: 7.5 kW
Power consumption: 8,5 kW
Electric voltage: 400 V
Phase (s): 3 Ph
Current type: ~
Power frequency: 50 Hz
Spindle mount: Camlock DIN ISO 702-2 No. 8
Spindle bore diameter: 105 mm
Top height: 310 mm
Tip width: 2225 mm
Circular diameter over machine bed: 620 mm
Circumferential diameter in the bed bridge: 880 mm
Circular diameter over longitudinal slides: 580 mm
Circular diameter above plan slide: 425 mm
Rotating length in the bed bridge: 880 mm
Bed width: 350 mm
Speed ​​range: 30 - 1500 min-1
Number of speed ranges: 12
Travel X-axis: 170 mm
Travel Z-axis: 350 mm
Travel Y-axis:
Tailstock mount: MK 5
Tailstock stroke: 180 mm
Tailstock Pinhole diameter: 72 mm
Cooling lubricant system Coolant pump: 60 W
Cooling lubricant system Tank capacity:
Spindle taper: MK 7
Feed range: 0.1 - 3 mm / rev
Feed range: 0.05 - 1.5 mm / rev
Slope Metric: 0.5 - 15 mm / rev
Inclination: 60 - 2 Gg / 1
Gradient Diametral Pitch: 4-120 D.P.
Slope module thread: 0.5 - 7.5 M.P

Delivery:

- Three-turn chuck
- Reducing sleeve MK 7 / MK 5
- Fixed center point MK 5 long
- Fixed center point MK 5 short
- Quick-change steel holder SWH 5-B (TX 5216)
- Quick-change steel holder SWH 7-C (TX 6222)
- Steel holder 25 x 120 Type D for square chisels
- Operating tool