OPTIturn TH 4615V

OptiTurn TH 4615V - Gravity Center lathe fully equipped, especially quiet, low vibration with Siemens inverters Vario drive and digital position display DPA 21
- Hardened and ground slideways
- Spindle Camlock DIN ISO 702-2 Nr. 8
- Speed ​​monitoring according to the Machinery Directive
- EMC filters for use in mixed areas
- Coolant system with separate coolant tank, level indicator and oil separator Easy and complete emptying and cleaning in accordance with DIN
- Guaranteed concentricity precision of the spindle nose better than 0.015 mm
- Right-handed rotation at the lathe slide switchable via indexing spindle
- Mechanical longitudinal feed switch off the lathe slide with four adjustable cams
- leading spindle
- Foot-operated emergency stop device
- Electrical components with Siemens
- Scale of the threading gauge
- Central lubrication at the lathe slide
DRO DPA 21 - Speed ​​display
- Significant reduction in production times
- Higher working accuracy
- Error rate is reduced
- Glass scales
Equipment Details:
Main spindle - Hardened and ground
- In oil bath
- In 2 adjustable precision taper roller bearings mounted
- Gears smoothly, hardened and ground

Quick feed gear - Enclosed assembly
- Gears and shafts are hardened and ground
- In oil bath running on precision bearings

Carriage - worked Precise
- Handwheels with adjustable precision scaling of 0.04 / 0.02 mm
- All guides adjustable by gibs
- Shafts and wheels run in oil
- Adjustment range upper slide ± 90 °

Spannschutz - large dimensions
- Integrated LED lamp

Energy chain - wiring through energy chain

Tailstock - for taper turning ± 15 mm adjustable
- Tailstock spindle sleeve and handwheel with adjustable precision scaling 0.025mm


The Vario lathe (frequency) corresponding to the standard DIN EN 55011: 2011-04 Class C2 - (used only in mixing and industrial areas)

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: 100 W
Drive motor spindle: 7.5 KW
Spindle taper: MK 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: max. 25 x 25 mm
Center height: 230 mm
Distance between centers: 1500 mm
Swing over machine bed: 460 mm
Swing over cross slide: 270 mm
Turning Ø in the bed gap: 690 mm
Turning length in the bed gap: 240 mm
Bed width: 300 mm
Spindle speed 30 - 2000 min-1
Number of steps: 2 steps Speed ​​electronically adjustable
Traverse top slide: 125 mm
Traverse cross slide: 285 mm
Longitudinal feed in the range: 0.031 to 1.7 mm / rev
Cross feed in the range: 0.014 to 0.784 mm / rev
Pitch - Metric in the range 0.1 - 14 mm / U
Pitch - inch in the range: 112-2 Gg / 1
Diametral pitch in the range: 4-112 D.P.
Module threads in the range: 0.1 to 7
Tailstock: MK 4
Tailstock quill diameter: 60 mm
Tailstock sleeve: 130 mm
Dimensions (L x W x H): 2,720 x 1,080 x 1,370 mm
Net weight: 1825 kg

Reducing MK6 / MK5
- Fixed Zentriespitze MK 4
- Steady rest passage Ø max . 160 mm
- Follow rest passage Ø max . 100 mm
- Quick-action tool holder SWH 5 - B
- Tool holder 25 x 120 type D for square tool
- Threading gauge
- Coolant system
- Machine lamp
- Change gear kit
- Operating tools
Note : The machine will not forget delivered without oil Chucks