OPTIturn TH 4010

OptiTurn TH 4010 - Equipped Mechanic Lathes Convincing precision and performance TH 4010D with digital position display DPA 21, TH 4010V with Siemens inverters Vario drive..
- Hardened and ground slideways
- Spindle Camlock DIN ISO 702-2 No.5
- Guaranteed concentricity precision of the spindle nose better than 0.015 mm
- Gears and shafts are hardened and ground, in oil bath running on precision bearings
- Motor protection switch (TH 4010 / 4010D TH)
- DC 24 Volt - Electrical
- Lockable main switch
- Forward / reverse rotation at the lathe slide switchable
- Pull-out chip tray with guide rails
- Safety handwheels with release function is given in the X- and Z-axis
- Emergency stop device with foot control
 TH 4010D / 4010V TH: - DRO DPA21
- User-friendly keypad, splashproof, closed and glare
- Higher working accuracy
- Error rate is reduced
- X, Y / Z 0, Z axis with 8-digit display
- Glass scales
 TH 4010V: - Quick change tool holders 3-E
- Tool holder 20 x 100 type D for square tool
- SINAMICS G120D
  Equipment Details: cabinet - 24 Volt DC power supply
- All contactors and relays from Siemens or Schneider - TH 4010V Eaton
  Main spindle - In oil bath
- Gears smoothly, hardened and ground
  Carriage - worked Precise
- Handwheels with adjustable precision scaling of 0.04 / 0.02 mm
- All guides adjustable by gibs
- Adjustment range upper slide ± 90 °
  LED Machine lamp Coolant system prismatic bed - Heavily ribbed
- Cast iron
- Induction hardened and precision ground
  Tailstock - for taper turning ± 10 mm adjustable
- Tailstock spindle sleeve and handwheel with adjustable precision scaling 0.025mm
  Substructure - without tool compartments, only screens
  Note: The Vario lathe (frequency) corresponding to the standard DIN EN 55011: 2011-04 Class C2 - (used only in mixing and industrial areas)

Length (product): 1920 mm
Width / depth (product): 740 mm
Height (product): 1222 mm
Weight (net): 750 kg
Drive motor power: 1.5 kW
Voltage: 400 V
Phase (s): 3 Ph
Current: ~
Frequency: 50 Hz
Spindle taper: Camlock DIN ISO 702-2 Nr. 5
Spindle bore / bar passage diameter: 52 mm
Center height: 205 mm
Distance between centers: 1000 mm
Swing over machine bed: 410 mm
Swing in the bed bridge 540 mm
Turning length in the bed gap: 165 mm
Bed width: 206 mm
Speed ​​range: 45 - 1800 rpm 1
Number of speed ranges: 16 steps
X axis travel: 100 mm
Y axis: 195 mm
Tailstock: MK 3
Tailstock quill stroke: 130 mm
Tailstock quill diameter: 45 mm
Spindle taper: MK 6
Tool holder Seat height max .: 16 mm
Feed range longitudinal: from 0.043 to 0.653 mm / rev
Number of feeds along: 48
Feed range plan: from 0.015 to 0.206 mm / rev
Number of feed plan: 48
Pitch Metric: 0,4 - 7 mm / U
Number of pitches Metric: 42
Slope inches: 70 - 4 threads / inch
Number of slopes inch: 42

Steady rest passage Ø 5 - 85mm
- Follow rest passage Ø 5 - 65 mm
- LED machine light
- Reducing MK6 / MK3
- Two fixed centering MK3
- Change gear set
- Operating tools TH 4010 / TH 4010D - Quadruple tool holder TH 4010V - Quick change tool holders 3-E
- Tool holder 20 x 100 type D for square tool in a standard delivery including:
Maschinenerstbefüllung with quality oil Chucks not forget!