AIRPROFI 703/270/15 VK

 

AIRPROFI 703/270/15 VK from Aircraft

 

From category Stationary piston compressor

 

- Stationary compressors with a standing or horizontal container, for an operating pressure of more than 10 bar
- The two-stage compression 2-cylinder high-performance unit allows a very low speed, which results in a particularly quiet and low-vibration running.
- The large fan wheel ensures optimum cooling.
- Intermediate and after-coolers ensure a low tank inlet temperature and thus reduce condensation.
- Quality electric motors equipped with motor protection switch
- Flexible hose hose with heat protection prevents vibration breakage
- Compressed air tank inside and outside galvanized, 15 years warranty on the tank against corrosion
- With high quality CONDOR pressure switch
- Ready for connection with all fittings AIRPROFI 703/75/13 H
- With 75 liter containers
- professional compressor with 13 bar operating pressure - Abnahme free
- You have 13 bar operating pressure available without the otherwise required Abnahme approval for compressors with shut-off pressure above 10 bar
- This can be performed by an authorized person at the AIRPROFI 703/75/13.
- A cut-off pressure of 13 bar is considered as practical.


Additional equipment K-version:
- With cold dryer for dry compressed air for a longer service life of compressed air tools and to avoid disturbances in pneumatic controls
- With automatic steam trap


Special features
- Delivery includes safety stand


equipment
- Automatic steam trap at the compressed air tank
- No unnecessary pressure loss due to level control

- Condensate conditioner for oil-water separation
- Important information on condensate preparation can also be found in the section Compressed air treatment.

- Fine filters for condensate and solid impurities with particles up to 25 μm.
- Compressed air quality according to ISO 8573-1
- As pre-filter in front of the cold dryer

- User-friendly operating concept
- Efficient design for cost-effective and safe operation
- Cooling fan from 0 - 100% speed-regulated, eliminating the usual pressure switch and the thermostat for the fan control.

Technical specifications / AIRPROFI 703/270/15 VK / Stationary piston compressor:

Compressor system: HOS
Maximum flow: 575 l / min
Filling capacity approx .: 460 l / min
High pressure: 13 (15) bar
Container capacity: 270 l
Cylinders / steps: 2/2
Speed: 850 min-1
Engine power: 4 kW
Power supply: 400 V
Power frequency: 50 Hz
Weight: 190 kg
Dimensions (L x W x H): 745 x 620 x 1860 mm
Sound pressure level at a distance of 1 m according to DIN 45635: 83 dB (A)
Airflow: 3/4 ""

Description:

- Stationary piston compressors with a two-stage, two-cylinder, high-performance unit made of gray cast iron for a long service life
- Solid professional quality for craftsmen
- Standard with cold dryer with integrated automatic steam trap
- Inside and outside hot-galvanized compressed air container with 15 years warranty against penetration
- On the safety stand, simply by using a fork lift truck
- filling capacity approx .: 460 l / min
- Maximum pressure: 15 bar
- Container capacity: 270 l

Delivery:

- Two-stage two-cylinder high-performance unit
- Cold dryer with integrated automatic steam trap
- Toothed drive belts
- Automatic CONDOR pressure switch
- Power plug with phase reverser for manual reversing of the direction of rotation
- 1 manometer for tank pressure
- 1 ball valve on the boiler
- Flexible hose hose with heat protection
- Inside and outside hot-galvanized compressed air container with 15 years warranty against penetration
- 1x 3/8 inch ball valve at the lower outlet for dewatering
- Three compressed air extraction points at the boiler
- Safety valve
- Ready for connection with all fittings
- Swing elements
- Safety stand

270 l capacity 4 kW 190 kg 575 l/min