New products

Lathe chuck for lathes

Chuck flange for mounting the lathe chuck Ø 315 mm Camlock DIN ISO 702-2 Nr . 8
Fits three-jaw lathe chuck ø 315 mm and four-jaw lathe chuck ø 315 mm

Accessories for OptiTurn TH 5615 / TH 5620 / TH 5630 / OptiTurn D 660 X 2000DPA / D 660 X 3000DPA total length ( b ) : 163 mm
Diameter: 225 mm

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Drive motor spindle: 7.5 kW
Spindle taper: MK 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 2,000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 790 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600rpm-1
Number of steps: 12 steps
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev 35 feeds
Cross feed in the range: 0.020 to 0.573 mm / rev 35 feeds
Pitch - Metric in the range 0.2 - 14 mm / rev 47 pitches
Pitch - inch in the range: 112-2 Gg / 1 60 pitches diametral pitch in range 4 - 112 50 Gewindegaenge
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 3,340 x 1,150 x 1,460 mm
Net weight: 2650 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: -
Drive motor spindle: 7.5 kW
Spindle taper: Mk 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 3000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 790 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600rpm-1
Number of steps: 12 steps
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev 35 feeds
Cross feed in the range: 0.020 to 0.573 mm / rev 35 feeds
Pitch - Metric in the range 0.2 - 14 mm / rev 47 pitches
Pitch - inch in the range: 112-2 Gg / 1 60 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 4,340 x 1,150 x 1,460 mm
Net weight: 3000 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: -
Drive motor spindle: 7.5 kW
Spindle taper: MK7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 105 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 2,000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 785 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600 rpm-1
Number of steps: 2 steps Speed ​​electronically adjustable
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev
Cross feed in the range: 0.020 to 0.573 mm / rev
Pitch - Metric in the range 0.2 - 14 mm / U
Pitch - inch in the range: 112-2 Gg / 1 inch
Diametral pitch within: 112-4
Module threads in the range: 0.1 to 7
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 3,340 x 1,150 x 1,460 mm
Net weight: 2630 kg

Accessories for OptiTurn TH 5620V

Turning tool 1 : PWLN L3232 P08
Turning tool 2 : PSDN N3232 P15
Turning tool 3 : PWLN R3232 P08
Turning tool 4 : CKJN R3232 P16
Turning tool 5 : MDJN R3232 P15
Height turning tool : 32 mm

suitable for lathes OptiTurn D 660 / TU 8020 / TU 8030

Screw-cutting lathe , which are characterized by high flexibility and economy - clutch transmission with dry sump lubrication
- Hardened and ground slideways
- The wiring is carried out via an energy chain
- Central lubrication at the lathe slide
- leading spindle
- Quick-action tool holder SWH 9
- Electrical components with Siemens
- Acceptance report