New products

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 5.8 kW
Capacity of the coolant pump: 100 W
Drive motor spindle: 5,5 KW
Spindle taper: MK 6
Spindle taper: Camlock DIN ISO 702-2 Nr. 6
Spindle bore, bar capacity: 58 mm
Quadruple tool holder Seat height: max. 25 x 25 mm
Center height: 230 mm
Distance between centers: 1500 mm
Swing over machine bed: 465 mm
Swing over cross slide: 270 mm
Turning Ø in the bed gap: 690 mm
Turning length in the bed gap: 240 mm
Bed width: 300 mm
Spindle speed: 25 - 2000 rpm 1
Number of steps: 12 steps
Traverse top slide: 125 mm
Traverse cross slide: 285 mm
Longitudinal feed in the range: 0.031 to 1.7 mm / rev 42 feeds
Cross feed in the range: 0.014 to 0.784 mm / rev 42 feeds
Pitch - Metric in the range 0.1 - 14 mm / rev 41 pitches
Pitch - inch in the range: 112-2 Gg / 1 41 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock: MK 4
Tailstock quill diameter: 60 mm
Tailstock sleeve: 130 mm
Dimensions (L x W x H): 2,750 x 1,245 x 1,568 mm
Net weight: 1810 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 5.8 kW
Capacity of the coolant pump: 100 W
Drive motor spindle: 5,5 KW
Spindle taper: MK 6
Spindle taper: Camlock DIN ISO 702-2 Nr. 6
Spindle bore, bar capacity: 58 mm
Quadruple tool holder Seat height: max. 25 x 25 mm
Center height: 230 mm
Distance between centers: 2,000 mm
Swing over machine bed: 465 mm
Swing over cross slide: 270 mm
Turning Ø in the bed gap: 690 mm
Turning length in the bed gap: 240 mm
Bed width: 300 mm
Spindle speed: 25 - 2000 rpm 1
Number of steps: 12 steps
Traverse top slide: 125 mm
Traverse cross slide: 285 mm
Longitudinal feed in the range: 0.031 to 1.7 mm / rev 42 feeds
Cross feed in the range: 0.014 to 0.784 mm / rev 42 feeds
Pitch - Metric in the range 0.1 - 14 mm / rev 41 pitches
Pitch - inch in the range: 112-2 Gg / 1 41 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock: MK 4
Tailstock quill diameter: 60 mm
Tailstock sleeve: 130 mm
Dimensions (L x W x H): 3.250 mm x 1.245 x 1.568 mm
Net weight: 1945 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: 100 W
Drive motor spindle: 7.5 KW
Spindle taper: MK 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: max. 25 x 25 mm
Center height: 230 mm
Distance between centers: 1500 mm
Swing over machine bed: 460 mm
Swing over cross slide: 270 mm
Turning Ø in the bed gap: 690 mm
Turning length in the bed gap: 240 mm
Bed width: 300 mm
Spindle speed 30 - 2000 min-1
Number of steps: 2 steps Speed ​​electronically adjustable
Traverse top slide: 125 mm
Traverse cross slide: 285 mm
Longitudinal feed in the range: 0.031 to 1.7 mm / rev
Cross feed in the range: 0.014 to 0.784 mm / rev
Pitch - Metric in the range 0.1 - 14 mm / U
Pitch - inch in the range: 112-2 Gg / 1
Diametral pitch in the range: 4-112 D.P.
Module threads in the range: 0.1 to 7
Tailstock: MK 4
Tailstock quill diameter: 60 mm
Tailstock sleeve: 130 mm
Dimensions (L x W x H): 2,720 x 1,080 x 1,370 mm
Net weight: 1825 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: -
Drive motor spindle: 7.5 kW
Spindle taper: MK 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 1500 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 790 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600rpm-1
Number of steps: 12 steps
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev 35 feeds
Cross feed in the range: 0.020 to 0.573 mm / rev 35 feeds
Pitch - Metric in the range 0.2 - 14 mm / rev 47 pitches
Pitch - inch in the range: 112-2 Gg / 1 60 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 2,840 x 1,150 x 1,460 mm
Net weight: 2285 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Drive motor spindle: 7.5 kW
Spindle taper: MK 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 2,000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 790 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600rpm-1
Number of steps: 12 steps
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev 35 feeds
Cross feed in the range: 0.020 to 0.573 mm / rev 35 feeds
Pitch - Metric in the range 0.2 - 14 mm / rev 47 pitches
Pitch - inch in the range: 112-2 Gg / 1 60 pitches diametral pitch in range 4 - 112 50 Gewindegaenge
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 3,340 x 1,150 x 1,460 mm
Net weight: 2650 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: -
Drive motor spindle: 7.5 kW
Spindle taper: Mk 7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 80 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 3000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 790 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600rpm-1
Number of steps: 12 steps
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev 35 feeds
Cross feed in the range: 0.020 to 0.573 mm / rev 35 feeds
Pitch - Metric in the range 0.2 - 14 mm / rev 47 pitches
Pitch - inch in the range: 112-2 Gg / 1 60 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 4,340 x 1,150 x 1,460 mm
Net weight: 3000 kg

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 8.5 kW
Capacity of the coolant pump: -
Drive motor spindle: 7.5 kW
Spindle taper: MK7
Spindle taper: Camlock DIN ISO 702-2 Nr. 8
Spindle bore, bar capacity: 105 mm
Quadruple tool holder Seat height: 25 x 25 mm
Center height: 280 mm
Distance between centers: 2,000 mm
Swing over machine bed: 560 mm
Swing over cross slide: 355 mm
Turning Ø in the bed gap: 785 mm
Turning length in the bed gap: 150 mm
Bed width: 350 mm
Spindle speed: 25 - 1600 rpm-1
Number of steps: 2 steps Speed ​​electronically adjustable
Traverse top slide: 130 mm
Traverse cross slide: 310 mm
Longitudinal feed in the range: 0.059 to 1.646 mm / rev
Cross feed in the range: 0.020 to 0.573 mm / rev
Pitch - Metric in the range 0.2 - 14 mm / U
Pitch - inch in the range: 112-2 Gg / 1 inch
Diametral pitch within: 112-4
Module threads in the range: 0.1 to 7
Tailstock MK 5
Tailstock quill diameter: 75 mm
Tailstock sleeve: 180 mm
Dimensions (L x W x H): 3,340 x 1,150 x 1,460 mm
Net weight: 2630 kg

Screw-cutting lathe , which are characterized by high flexibility and economy - clutch transmission with dry sump lubrication
- Hardened and ground slideways
- The wiring is carried out via an energy chain
- Central lubrication at the lathe slide
- leading spindle
- Quick-action tool holder SWH 9
- Electrical components with Siemens
- Acceptance report

Center lathe , which are characterized by high flexibility and economy - clutch transmission with dry sump lubrication
- Hardened and ground slideways
- The wiring is carried out via an energy chain
- Central lubrication at the lathe slide
- leading spindle
- Quick-action tool holder SWH 9
- Electrical components with Siemens
- First filling with high - oil
- Acceptance report

Power: 1,5 kW / 230V Turns: 30 - 4.000 min¯¹ (LxBxH): 1370 x 660 x 440 mm