New products

Electrical connection: 400 V / 3 Ph ~ 50 Hz
Total connected load: 5.8 kW
Capacity of the coolant pump: 100 W
Drive motor spindle: 5,5 KW
Spindle taper: MK 6
Spindle taper: Camlock DIN ISO 702-2 Nr. 6
Spindle bore, bar capacity: 58 mm
Quadruple tool holder Seat height: max. 25 x 25 mm
Center height: 230 mm
Distance between centers: 1000 mm
Swing over machine bed: 465 mm
Swing over cross slide: 270 mm
Turning Ø in the bed gap: 690 mm
Turning length in the bed gap: 240 mm
Bed width: 300 mm
Spindle speed: 25 - 2000 rpm 1
Number of steps: 12 steps
Traverse top slide: 125 mm
Traverse cross slide: 285 mm
Longitudinal feed in the range: 0.031 to 1.7 mm / rev 42 feeds
Cross feed in the range: 0.014 to 0.784 mm / rev 42 feeds
Pitch - Metric in the range 0.1 - 14 mm / rev 41 pitches
Pitch - inch in the range: 112-2 Gg / 1 41 pitches
Diametral pitch in the range: 4 - 112 50 Gewindegaenge
Module threads in the range: 0,1 - 7 34 module thread
Tailstock: MK 4
Tailstock quill diameter: 60 mm
Tailstock sleeve: 130 mm
Dimensions (L x W x H): 2.200 mm x 1.245 x 1.568 mm
Net weight: 1645 kg

Chucks steel
Camlock DIN 55029 Direct recording
Diameter: 250 mm
Through Hole : 78 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed ​​: 3,500 min - 1

Camlock DIN ISO 702-2 Nos. 6 and CS3C ø 250 mm Camlock DIN ISO 702-2 Nr . 8

Diameter: 250 mm
Through Hole : 76 mm
Height with jaws : 143 mm
Height without jaws : 89 mm
Speed ​​: 3,500 min - 1

Collet chuck suitable for OPTIMUM lathes - OptiTurn D 420 - OptiTurn TU 4210V

Turning tool 1 : PWLN R2020 K08
Turning tool 2 : PWLN L2020 K08
Turning tool 3 : PSDN N2020 K12
Turning tool 4 : CKJN R2020 K16
Turning tool 5 : MDJN R2020 K11
Height turning tool : 20 mm

ISO : SNMG120408
middle plate width ( D1 ) : 12,7 mm
Bore ( D2 ) : 5.16 mm
Angle ( B1 ) : 90 °
Height insert ( S1 ) : 4.76mm
Radius ( Re) : 0.8 mm

Turning tool 1 : SER 2020 K16
Turning tool 2 : PrgNr 2020 K10
Turning tool 3 : PRANN 2020 K10
Turning tool 4 : MVVNN 2020 K16
Turning tool 5 : MVJNR 2020 K16
Height turning tool : 20 mm

Chuck flange for mounting the lathe chuck Ø 200 mm Camlock DIN ISO 702-2 Nr . 6
Fits Four-jaw lathe chuck ø 200 mm Combined